Top 10 Clear Adhesive Pads UK – Headphones & Earphones

As an Amazon Associate I earn from qualifying purchases.

1. GorillaGrit

Furniture, Small Clear Door Knob Bumpers Set of 12 Self-Adhesive Door Stoppers Wall Protectors Rubber Feet for Speakers, Electronics

GorillaGrit - Strong adhesive and easy peel-off installation. Made in the usa. Can also be used with refrigerator door, as rubber feet for furniture, stereo, subwoofers, cabinets, speakers, appliances and other electronics. Doorstops measure 088 inches 22mm in Diameter X 040 inches 10mm in Height. Soft pads dampen noise by absorbing shock and providing cushion. Set of 12 self-adhesive small Rubber Door Bumpers; Color: Clear or Transparent. Stick the bumpers on a wall to protect it from damage caused by doorknob, door handle slamming.
BrandGorillaGrit
ManufacturerFloor Shepherd
Height1.02 cm (0.4 Inches)
Length2.24 cm (0.88 Inches)
Weight0.03 kg (0.06 Pounds)
Width2.24 cm (0.88 Inches)
Part NumberDRBMP-SMCLR-03
ModelDRBMP-SMCLR-03

2. Anteel

Anteel Sticky Adhesive Compatible with Socket Collapsible Grip, 9 Pack Double-Sided Replacement for Swappable Phone Expanding Base, Extra Super Strong Circle Glue Tape for Mobile Car Holder

Anteel - Genuine adhesive padsthe best sticky tapes for phone collapsible grip we provide is with high temperature resistance and stronger stickiness features. Ensure that the collapsible grip mount has a clean surface to adhere to so that it sticks properly.

High strength allows use of smaller bond areas, quick cure time. It resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. 9 pcs adhesive pads for collapsible grip baseanteel double-sided bonding pads provide surface adhesion to make selecting the right pads for your collapsible grip.

Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. 6 pcs alcohol prep padswipe down the adhesion surface with alcohol prep pads when applying adhesive pads. Sticky adhesive replacement superior performanceAnteel double-sided bonding adhesive successfully bonds various surfaces for permanent and repositionable applications. Diameter: 1. 4 inches 35mm is perfectly sized for socket base.
BrandAnteel
ManufacturerAnteel
Height0.08 cm (0.03 Inches)
Length3.5 cm (1.38 Inches)
Weight0.01 kg (0.02 Pounds)
Width3.5 cm (1.38 Inches)
Part NumberAnteel_9AA

3. Neutrade

Neutrade GoPro 3M Sticky Pads Double Sided Adhesive pads for gopro helmet mounts Spare Replacement set for GoPro and SJCAM Action Camera Pack of 6 Square Pads

Neutrade - Manufactured by Neutrade; As used by professional television crews. Great for gopro, Action Cameras & Dashcams. Very strong High Bond. Size: 44 x 34mm. Spare set for Curved Action Camera Mounts.
BrandNeutrade
ManufacturerNeutrade
Part NumberSticky Pads

4. Anteel

6pcs 3.15"80mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam, Anteel Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit

Anteel - You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. 6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. Please wait 24 HOURS to use.

Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. Press down repeatedly to increase the contact of the adhesive with the substrate. Compatible with most suction cup dashboard mount and other windshield long arm mount, wireless charger base, ETC, EZ Pass/I-Pass/SunPass holder, camera mount, GPS holder, dash camera mount holder etc on the market. It also resists heat and moisture, easy peels off without leaving any sticky residue behind. 6pcs clear adhesives replacementanteel offers 6 pcs round clear sticky adhesive padsDiameter: 3.

15"/80mm for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. And wait at least 24 hours to use for the better adhesion. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
BrandAnteel
ManufacturerAnteel
Height0.1 cm (0.04 Inches)
Length8 cm (3.15 Inches)
Width8 cm (3.15 Inches)
Part NumberAnteel_6D8A

5. Anteel

Anteel Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit, 6pcs 2.76"70mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam

Anteel - Please wait 24 HOURS to use. High temperature resistance sticky adhesive these stickers have high temperature120℃+ resistance performance. Easy to removethese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, bonding almost instantly with no drying time.

Easy to fix your car phone socket base, truck, heavy duty dashboard mount base, you can stable and secure driving uber, vehicle in bumpy roads.6pcs clear adhesives replacementanteel offers 6pcs round clear sticky adhesive padsDiameter: 2. 76"/70mm, for attaching dashboard pad mounting disk of your suction cup dashboard phone mount. It also resists heat and moisture, easy peels off without leaving any sticky residue behind. You can use it without worry in hot Summer.

You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. Press down repeatedly to increase the contact of the adhesive with the substrate. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard. Please do not hesitate to contact us and we will provide you our best after-sale service. Package includes6 x 2.
BrandAnteel
ManufacturerAnteel
Height0.1 cm (0.04 Inches)
Length7 cm (2.76 Inches)
Width7 cm (2.76 Inches)
Part NumberAnteel_6D7A

6. Zonon

4 Pieces Cell Phone Grip Tape Case Stickers Anti-Slip Sticker Tape Textured Silicone Rubber Traction Grip Adhesive Non-Slip Pads for Phones Tablet Computer Gaming Cases Clear

Zonon - Convenient to use: the back of the grip sticker is sticky to keep the surface smooth and clean, you just peel off the back film and stick it to the phone or other areas, and it will not fall off after completion. Proper size: the size of each non-slip safety sticker is about 15 x 9 cm/ 5.

9 x 3. 5 inches, they are small in size and light in weight, and you can easily cut them into various shapes and sizes to meet your needs; It is worth mentioning that these are essential practical accessories in life. Practical tool: self-adhesive tapes are good non-slip tools for your mobile phone, mouse, deck, restaurant, toilet, and can also be applied to home, such as your mobile phone, garden, game pad, hotels, it is suitable for covering most different surfaces to increase friction, backyard, corporate or apartment buildings and more places where traction is easier to install.

Package contains: you will gain 4 pieces of phone grip non-slip pads in a different style, each style has 2 pieces, and besides, it is enough for you to use, and they can be compatible with most smartphones and can meet your demands, you can share them as gifts with your close friends. International products have separate terms, are sold from abroad and may differ from local products, age ratings, and language of product, including fit, labeling or instructions.
BrandZonon
ManufacturerZonon
Part NumberZonon-Grip Decals-02

7. volport

3M Sticky Adhesive Pad Replacement for Collapsible Grip Stand, VOLPORT 6pcs Double Sided Sticker Pads for Swappable Phone Expanding Base, Extra Super Strong VHB Circle Glue Tape for Mobile Car Holder

volport - Last but the most important rule, please repeat this act: peel-if come up-press red film back-peel again. Volport product comes with 12-months warranty, cooking kitchen, wall, s10 plus, if you have any question, desk, bed post, office, iphone xs, windshield, please contact us. 3. 6 pieces strong adhesive stickers for grip base: 6 pack bigger circular replacement adhesive is exclusively designed to re-stick phone collapsible grip stand and finger ring phone holder sticky.

Please clear the mounting surface with universal alcohol prep pad before stick. 2 pieces magnetic phone car holder adhesive pads: two small circle 3m double sided tape tiny foam adhesive disk work with the bottom of dashboard car mount, 360 magnetic car mount, wireless charger mount, dash cam mount holder, wall phone holder, windshield gps navigation mount, cell phone holder, iphone car mount, collapsible phone grip car mount etc.

Compatible with phone case iphone 13 Pro Max, locker, iphone xs max, window, cabinet, nightstand, ceiling, s9, bedside, steering wheel, lg.2. We adopt original black gel, high temperature and low temperature resistance, stickiness is 40% stronger than others, vehicle, truck, no problem using in hot Summer when you driving car, jeep, uber etc.1. Adhesive can't stick well on phone case, texture surface silicone phone case, in this situation, we are here. Important note: here are some problem customer may encountered frequently.
Brandvolport
Manufacturervolport
Height3.5 cm (1.38 Inches)
Length0 cm (0 Inches)
Weight0.02 kg (0.04 Pounds)
Width3.5 cm (1.38 Inches)
Part NumberVOLPORT- VM0027US

8. VIIMAKE

8pcs 3M Sticky Adhesive Replacement Pads for Socket Base Mount,VIIMAKE 1.38 inches Round 3M VHB Double-Sided Adhesive Pads,for Phone Collapsible Grip Stand Back Base Sticker Tapes Red

VIIMAKE - The temperature range of tape application is 21-38℃. Easy to tear off:we have upgraded the quality of 3m vhb black gel, the red film is easy to tear, it is difficult to peel off. Polymer adhesive, unlike the red base film on the market, strong stickness and high temperature.

Application technology:replacement adhesive pads, mirror, solvent resistance, good uv resistance, office, it is not suitable for bonding. Can be used in home, bathroom, locker, wall, the bonding surface must be clean and dry. The temperature range of tape application is 21-38℃. It is recommended that if the initial bonding temperature is lower than 10℃, refrigerator, bed, with strong viscosity, softness and good conformability.

To achieve the bonding effect, etc. But it can nOT be used in silicone case. Used for socket base:offers 8 pcs adhesive padsdiameter: 1. 38 inches. This round double sided adhesive replacement parts designed for socket base, they can greatly extend the life of your expanding phone grips stand. Important note:to achieve the bonding effect, the bonding surface must be clean and dry. Come with 4 pack alcohol pads help you clean the area where you’d like to place.
BrandVIIMAKE
ManufacturerVIIMAKE
Part Number3MRO-148

9. MeetRade

Stick On Double Sided Heavy Duty Adhesive Pad Disk For Lock Sucker Suction Cup Hook Mounting on Dashboard For xiaomi xiaoyi gopro camera GPS Sat Nav Cam 70mm, MeetRade Adhesive Suction Cup Mount

MeetRade - Never fall again! 2. Material:made of 3m vhb super strong adhesive, it can help suction cup installs on not totally flat surfaces tightly. Even in a car, it also waterproof, just peel it from the side and slowly pull it up.

Peel the protector film off, then apply on. 5. Press it at least 30 second. 6. Don’t use it in 12 hours. The adhesive is easily removable and never leave a residue. Br>high temperature resistance, so can install the camera out side the house. Clean the surface of the suction cup by alcohol. 2. Peel the adhesive pad and apply to the suction cup carefully, remember you finger don’t touch the adhesive pad.

3. Clean the surface you need to install. 4. 3. Size and use: diameter 70mm2. 76 inch, fit for almost kind of suction cup! how to use: 1. 1. Where to use? your sucker is not strong enough and fall off often? This MeetRade super strong adhesive pad can help your suction cup to lock firmly.
BrandMeetRade
ManufacturerMEETRADE
Part Number70mm disc

10. volport

Sticky Adhesive Replacement for Dashboard Pad Mounting Disk, GPS Windshield Dash Cam, VOLPORT 2pcs 3M Circle Heat Resistant Double Side Tapes Strong VHB Sticker for Suction Cup Car Phone Holder Base

volport - Just peel off the old gel adhesive from mount and clean the the surface with alcohol wipe before using the new adhesive, after the surface is dried, or stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5- 10 minutes for better connecting to the surface, peel off the 3m adhesive film to stick the dashboard pad mounting disk, please wait 24 HOURS to use .

Suitable for suction cup car dashboard phone stand and other windshield long arm mount, tablet computer bracket, camera mount, GPS holder, ETC, wireless charger mount, dash camera mount holder, iphone car mount, dashboard toys of suitable diameter. Make sure the surface of the chosen area and dashboard pad mounting disk of suction cup phone mount is cleaned completely before applying a new adhesive. You can also cut it to the size you need.

Extra strong both side round 3m vhB dashboard cell phone mount replacement adhesion pads's stickiness is 40% stronger than ordinary 2 side sticky glue. You can also adhere the adhesive to the suction cup directly. Easy to installthe replacement kit comes with alcohol wipes to clean the surfaces before applying. We provide a one-year warranty and if you need any help with our product, 4 x alcohol pads, please do not hesitate to contact us and we will provide you our best after-sale service. All we want is your satisfaction.
Brandvolport
Manufacturervolport
Height0.99 cm (0.39 Inches)
Length17.98 cm (7.08 Inches)
Width8.99 cm (3.54 Inches)
Part NumberV-C1AC-N