Top 10 KES Shower Head UK – Handheld Showers

As an Amazon Associate I earn from qualifying purchases.

1. KES

DP730-CH, 7 Spray Patterns Shower Head High Pressure with Hose 1.5m and Shower Head Holder for Bathroom, KES Shower Head and Hose

KES - A must-have function - power wash: the wash mode allows you to easily clean foam, dirt, and limescale on walls or tubs. Note: wash mode can NOT be used on fragile items and body parts. Kes trickle mode maintains a constant temperature water flow and minimizes drainage. Also, trickle, soft mist, pulsating massage, the easy-to-clean nozzles can prevent lime build-up.

Make sure to turn off the main switch after bathing. Trickle mode - save water: when shaving or bathing pets, you may want to temporarily shut off water while keeping the main switch on. 7 shower modes: 7 modes rain, rain + pulsating massage, rain + soft mist, and power wash of the shower head can be easy to switch as needed. Note: self-adhesive mount fits smooth tiles, glass, PVC, an adjusted shower holder, Teflon tape, etc. Note: not fit for tankless water heaters.

Package included: a 60" extra-long stainless steel hose, and an extra self-adhesive holder that can be installed at a lower place for pets or children bathing and bathroom cleaning. The soft mist mode is friendly for whom have arthritis and the pulsating massage mode can relax your muscle after a tiring day. Keep a firm hold of the shower as you run this mode to avoid injury or property damage from sudden increase in water pressure. Any quality problem with the product can be guaranteed at no cost under warranty.
BrandKES
ManufacturerKES Sanitary Ware
Height12.7 cm (5 Inches)
Length29 cm (11.42 Inches)
Width8 cm (3.15 Inches)
Part NumberDP730-CH-20220107
ModelDP730-CH

2. KES

J201, Fixed Shower Head Adjustable with Swivel Ball Round Chrome, KES Rainfall Shower Head 8-Inch Rain Shower Head Overhead Replacement

KES - Shower angle can be easily adjusted to accommodate both kids and adults providing perfect shower experience for every family member. Note: fits standard G1/2 connectors. Removable flow restrictor: water flow restrictor 2. 2 gpm can be removed if your water pressure is low.

8-inch 20 cm outer diameter large panel built by engineering grade plastic ABS, better surface gloss, more impact resistance, more heat resistant. Our silicone-made nozzles allow easy cleaning - simply pull and push the nozzle aside will get the job done in seconds. Anti-clogging nozzles : mineral deposits in water can build up in shower nozzles over time causing clogging nozzle and spliting spray. Rainfall shower head material: the back cover is made of stainless steel, chrome finish. Brass swive ball joint: shower's brass swivel ball allows you to adjust any angle of the rainfall shower head after installation.

Safe and durable. Detailed instructions are included in our package. Water flow can go up to 5. 5 gpm without flow restrictor please remember to check your local plumbing codes and regulations before removal. Perfect for shower:generously sized 8" diameter rainshower shower head provide a steady, full-coverage spray, perfect for every shower need, from rinsing shampoo from hair to relaxing tired muscles.
BrandKES
ManufacturerKES Home (U.S.) Limited
Height0.01 cm (0 Inches)
Length7.87 cm (3.1 Inches)
Weight0.6 kg (1.32 Pounds)
Width2.36 cm (0.93 Inches)
Part NumberJ201
ModelJ201
WarrantyOne year manufacturer's warranty.

3. KES

PB4-CH, KES Shower Head Holder Hand Shower Bracket Replacement for 18-25MM Slide Bar Adjustable Shower Rod Holder Chrome Plated

KES - Protective and anti-slipping design: Built-in silicone pad, to keep the shower holder in place and protect the shower slider rail from daily scratches. Durable construction: the shower holder bracket is made of engineering grade ABS material.

Easy installation: no tools required, no disassembling the shower rail slider, just enjoy the thoughtful design of this shower slider bracket. Adjustable diameter and height: kes shower head bracket fits round shower riser rail of 18-25MM O. D 071"-098". Note: do not tighten the bracket screw too tight. You can adjust the shower height along the shower pole easily to bring every family member a comfortable shower experience. Note: please don't tighten the rotatable handwheel too hard and don't tighten it with a wrench.

Coated with industry-leading chrome finish, build to resist daily scratches and corrosions. The shower bracket can hold up to 2KG handheld shower. 360 degree rotation: the shower head holder can rotate 360 degrees freely. To make it easier to adjust the spray angle, you can tighten or loosen the bracket screw according to the weight of your shower.
BrandKES
ManufacturerKes
Height0.01 cm (0 Inches)
Length4.65 cm (1.83 Inches)
Weight89
Width1.57 cm (0.62 Inches)
Part NumberPB4
ModelBHBUKALIAINH1647

4. KES

KES Brass Handheld Shower Head Holder Bracket Wall Mount for Bathroom Hand Sprayer Wand or Toilet Hand Held Bidet Spray Chrome, C107

KES - Multi-layer finish: high quality chrome finish, build to resist daily scratches, corrosions and tarnishing. Screw-mounted: screws are made from SUS304 stainless steel and are rustproof. Screws are invisible after installation giving the product a beautiful and elegant look. All hardware included: the package comes with all the installation hardware you need. You can install the product once you receive the package. Suitable to hold hand shower head and bidet sprayer. Premium material: the handheld shower head holder is made of solid brass which ensures quality and longevity.
BrandKES
ManufacturerKES Sanitary Ware
Height12.7 cm (5 Inches)
Length3.2 cm (1.26 Inches)
Width2.8 cm (1.1 Inches)
Part NumberC107CHUPCKES20220304
WarrantyOne year manufacturer's warranty.

5. KES

KES Shower Head Holder Hand Shower Holder Bracket Replacement for 18-25MM Shower Riser Rail Adjustable Shower Bracket Polished Chrome, PB4-CH

KES - Protective and anti-slipping design: Built-in silicone pad, to keep the shower holder in place and protect the shower slider rail from daily scratches. 360 degree rotation: the universal shower head holder can rotate 360 degrees freely.

The shower bracket can hold up to 2KG handheld shower. Note: please don't tighten the rotatable handwheel too hard and don't tighten it with a wrench. Adjustable diameter and height: kes shower head bracket fits round shower riser rail of 18-25MM O. D 071"-098". Coated with industry-leading chrome finish, build to resist daily scratches and corrosions. You can adjust the shower height along the shower pole easily to bring every family member a comfortable shower experience.

Durable construction: the shower head holder is made of engineering grade ABS material. Easy installation: no tools required, no disassembling the shower rail slider, just enjoy the thoughtful design of this shower slider bracket. To make it easier to adjust the spray angle, you can tighten or loosen the bracket screw according to the weight of your shower.
BrandKES
ManufacturerKES Sanitary Ware
Height12.7 cm (5 Inches)
Length11.8 cm (4.65 Inches)
Width4 cm (1.57 Inches)
Part NumberPB4-CH-UPC

6. KES

KES Shower Head Holder 16-19MM, PB10S19-CH, Adjustable Shower Holder Bracket Replacement Shower Riser Rail Polished Chrome

KES - Durable construction: the shower head holder is made of engineering grade ABS material. 360 degree rotation: the shower head holders can rotate 360 degrees freely. Coated with industry-leading chrome finish, build to resist daily scratches and corrosions.

Note: do not tighten the bracket screw too tight. Note: do not tighten the rotatable switch too tight, and do not tighten it with a spanner. Protective and anti-slipping design: Built-in silicone pad, to keep the shower holder in place and protect the shower slider rail from daily scratches. To make it easier to adjust the spray angle, you can tighten or loosen the bracket screw according to the weight of your shower.

Easy installation: no tools are needed, no need to disassemble the shower slide bar, just loosen the switch at the end of the shower holder bracket, then it can be installed on the shower slide bar. You can adjust the size of the shower holder bracket to clamp it to the rail flexibly through the rotatable switch at the end position. Wide application: kes shower head holder fits round shower riser rail of 16-19mM O. D.
BrandKES
ManufacturerKES Home
Height12.7 cm (5 Inches)
Length12.5 cm (4.92 Inches)
Width3.7 cm (1.46 Inches)
WarrantyOne year manufacturer's warranty.

7. KES

PSB101-BN, KES Shower Head Swivel Ball Adapter, Brass Shower Connector Ball Joint Adjustable Shower Extension Universal Component Brushed Nickel

KES - The connection is tight enough that it won't fall back down after swiveling to any angles. Swivel ball joint: ball connector swivel angle is 23°11 per side. Swivel it and it will stay the exact position you need. This swivel ball allows you to adjust any angle of the shower head after installation.

Just twist on! Package includes FREE Teflon tape. Easy installation: this universal connection fits with standard G 1/2 straight threaded shower arms & shower heads. Rustproof: constructed of brass, the shower head swivel adapter of shower head extension arm can protecting against corrosion & rust and need trivial maintenance. Shower angle can be easily adjusted to accommodate both kids and adults, providing perfect shower experience for every family member.

This shower head swivel adapter can serve many years without leakage. Brass body: solid brass body construction of this shower head adapters provides much higher performance high heat-resistance and pressure-resistance and durability than plastic ones. Large water flow: flow rate is 7. 8 gpm @ 60psi, definitely no flow restrictions! You can enjoy rainfall showering experience even your shower head is as large as 16-inch.
BrandKES
ManufacturerKES Sanitary Ware
Height0.03 cm (0.01 Inches)
Length40.64 cm (16 Inches)
Width40.64 cm (16 Inches)
Part NumberPSB101-BN-KES-190920
ModelPSB101-BN-KES-190920
WarrantyOne year manufacturer's warranty.

8. Newentor

Chrome, Newentor Shower Head with Hose, Universal Shower Head and Hose Set with 6 Settings Spray Mode, High Pressure Shower Heads with Hose Set 1.5m

Newentor - Multi-function handheld shower headnewentor shower heads to increase pressure with 6 settings spray, baby or pet bath, suitable for shower, head massage, and bathroom cleaning. The double interlocked stainless steel shower hose is anti-kink, anti-bending, and anti-stretch. Simultaneously the powerful shower head will improve the utilization ratio of water.

The smooth conical nut is the side that attaches to the shower head. Please note that the hex nut is the side that attaches to the shower head holder. Adjustable shower head with hosespecial button on the side of large shower heads allows you to adjust the settings spray with a single hand easily. High pressure shower headsthe pressure boosting shower head and hose offer your body complete and even coverage, allowing you to enjoy a luxurious showering. High-quality shower head and hosethe big shower head is equipped with a shower hoses 1.

5m which fits for global 1/2" interface and most standard showerhead. Fine and durable shower hose and headthe universal shower head with pearlescent ABS panel is scratch-resistant and shower heads anti-limescale silicon nozzles prevent the build-up of limescale, which will extend the use life of the shower hose and head, create a healthy shower environment for your family. Suitable for bath mixer showers & thermostatic mixer showers. Newentor shower head and hose set truly enhance your showering comfort and pleasure.
BrandNewentor
ManufacturerNewentor
Height12.7 cm (5 Inches)
Length10.09 cm (3.97 Inches)
Weight0.6
Width3.94 cm (1.55 Inches)
Part NumberPelagia
ModelPelagia
WarrantyWarranty for 365days.

9. KES

KES Black Shower Set 3-Function Concealed Shower System for Bathroom Wall Mounted 12-Inch Shower Head with Handheld Including Rough-in Valve Body and Trim Kit Square, X6230S12-BK

KES - Overhead and hand shower simultaneously. Ceramic disc cartridge: the ceramic disc cartridge builds to survive 500, 000 open-close cycles to provide smooth, long-lasting and quality performance. 3-way diverter: the build-in diverter supports 3-functions: A.

Moreover, its ceramic disc cartridge offers easy operation and drip-free protection throughout years. 12" overhead shower; B. Standard g1/2 thread, easy to install and leakage proof. The 12-inch extra-large overhead black shower head is made from SUS 304 stainless steel while the exterior material of the handheld shower is constructed from brass. Tangle-free shower hose: strengthened stainless steel spiral wound hose is a tangle-free design and can be extended from 59 to 75 inch 1.

5-1. 9 meters, convenient for various purposes, such as cleaning your shower and even bathing your pets. Plumber's tape is for free! All metal: the shower valve body is made from sturdy brass non-plastics, ensuring high quality and longevity. Brass valve body & standard connection: one-piece sturdy brass non-plastics shower valve body ensures quality and longevity. Hand shower; C.
BrandKES
ManufacturerKES Sanitary Ware
Warranty‎lifetime limited warranty.

10. KES

F209S78-BS, KES Shower Riser Rail Stainless Steel, Shower Slider Rail with Adjustable Shower Head Holder Wall Mounted Brushed Finish 78CM

KES - The shower bracket can hold up to 2KG handheld shower. Note: the slide bar is not a one-piece structure, which needs to be assembled. Adjustable handheld shower holder: the shower head holder is made of engineering-grade plastic ABS.

Flexible installation: kes shower riser rail kit features two adjustable brackets, which provides easy alignment with the existing drill holes, or can be attached to the grout line without damaging tiles. You can easily have it slid up and down on the shower riser rail. Rustproof: the slide bar and two brackets are constructed of Type 304 premium grade stainless steel, protecting against corrosion & rust, ensuring durability and longevity.

Shower height and angle can be easily adjusted to accommodate both kids and adults, providing the perfect shower experience for every family member. Screws are made from premium grade SUS 304 stainless steel. Wall-mounted installation: use screws and anchors in the package to install this slide bar. The adjustable distance between the two brackets is 205" 520 mm to 28. 4" 720 mm. Drill-bit size is 6mm.
BrandKES
ManufacturerKES Home
Height12.7 cm (5 Inches)
Length78 cm (30.71 Inches)
Width2.2 cm (0.87 Inches)
Part NumberF209S78DG-BS-20200810
WarrantyOne year manufacturer's warranty.