Top 10 Mpow Car Phone UK – Mobile Phone Automobile Cradles

As an Amazon Associate I earn from qualifying purchases.

1. MSCACM

Car Phone holder,Car Holder,Car Phone Cradle,Car Phone Mount,Dashboard Windscreen Car Phone Holder,Universal Car Mount with One Button Release&Strong Sticky Gel Pad for iPhone13/12/X,Galaxy S20/10,etc

MSCACM - Note:1. Remove the dust film from the bottom of the bracket before installing the car phone holder mount; 2. Allow the dashboard pad to sit for 24 hours after installation. Ultra sticky suction padcar phone holder secure suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.

Wash and air dry to regain Stickiness. Note:we do not recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction; when you rinsing and air drying the suction cup please use the car phone holder after 24 hours. All installation is just in seconds. With one button release clamp, you can put and remove your phone effortlessly, providing you an open and clear sight for safe driving, safeguarding the Safety of taking a call. One-hand operationdashboard phone mount can not only keep your phone on the dashboard. With its 2-section adjustable arms, enjoy hands free calls while driving, The phone holder can lean down beneath your dashboard, press the release button to open the clamp and set the phone.

Tip: sprinkle a little water in the place where the sucker is fixed, try not to move, Exhaust the air, please press the suction cup base first, and the fixity is better. Multiple usages car phone holderour car phone mount with washable and reusable suction cup, caring for your driving safety and making your life more convenient. Full protectionthe arms, releasing your hand from holding the phone, can be mounted here and there as a dashboard mount, windshield cradles or desk holderKitchen/Office/Bathroom/Desk, feet and surface of the car phone holder have sponge pads to protect your equipment from scratches.
BrandMSCACM
ManufacturerMSCACM
Height13 cm (5.12 Inches)
Length8.51 cm (3.35 Inches)
Width8 cm (3.15 Inches)

2. VANMASS

Stable 2.0 Universal Mobile Stand Automobile Cradle Car Accessories for Windscreen Dashboard Vent Van iPhone 13 12 11 xr Samsung Galaxy S22 S21 Sat Nav, 2022 Latest VANMASS Car Phone Holder Mount

VANMASS - Free angle adjustmentthe long arm telescopic pole offers 12. 7cm~19. 5cm length adjustment and 270° angle adjustment, while the back of the phone holder has a 360° rotatable ball, these flexible parts allow you to use your phone at the most comfortable angle. High-end = quality materials + grandmaster designvanmass car phone holder made of pc+abs material has passed 4 environmental reliability tests and has a temperature resistance range of -42 ℃ to 100 ℃, it is also highly resistant to UV raysEnsuring reliability even in the sun, and the telescopic pole uses a reinforced sliding rail structure to greatly reduce wobbling during driving.

3 in 1 multi-function car phone mountare you not sure which installation method is better for your car? No worries! The 3 in 1 car phone holder can be flexible placement! Dashboard & Windscreen & Air Vent, significantly reduced obstruction of air from vent, high-quality air vent clipan extra metal air vent clip is included, all places work perfectly! Improved, which is more stable than the plastic clip and is perfectly compatible with both vertical and horizontal air vents. Where it comes into contact with your phone, which not only protects your phone from scratches, but also has a good shock-absorbing effect and is more stable.

Smoother "one click release you can easily place or remove the phone with one hand. Sturdy hold all phone from 4”-7”to adapt to different phones and cases, huawei, motorola, xiaomi redmi, google pixel, oppo, vanmass was the first to invent 8-level adjustable side clamps and foot. Larger suction cup, stronger suctionthe diameter of the suction cup has been increased from 65mm to 69mm, and the PU adhesive has been applied to increase the suction power by 20%. This upgraded air vent clip improves the distance from the phone to the air vent from 42mm to 55mm, And thicker support back ensures the heat from vent will not damage your phone.
BrandVANMASS
ManufacturerVANMASS
Height14.73 cm (5.8 Inches)
Length8.89 cm (3.5 Inches)
Width7.62 cm (3 Inches)
Part NumberCTEZ11
ModelCTEZ11

3. APPS2Car

6 Strong Magnets, Flexible Adjustable Dashboard Phone Car Holder, APPS2Car Magnetic Car Phone Holder, Strong Suction Phone Mount Compatible With Iphone 13/Pro/Max/Mini And More.

APPS2Car - Multiple-scenario use: the phone holder allows you hands free to watch movies, or make video calls when you at school, at home, reply to messages, browse recipes, at work. Make it more compatible with your car. High quality suction cups adopting high quality drip adhesive material, it can fit completely with the contact surface without gaps.

After many temperature endurance tests, this suction cup can withstand -4℃-158℃ temperature. Sticks tightly to your dashboard and does not fall off. Wide compatibilitythe car phone holder dashboard is suitable for 4-7 inch phone. Flexible adjustmentadjustable knob is added to the windscreen phone holder for car bar, which can be adjusted 240 degrees. Such as iphone 13/mini/pro/pro max/12/pro/xs/xs/max/xr; galaxy s20/20+/ultra s10 s10e 5g S9; LG G4, G5, G6; Sony Xperia; Google Pixels; Nexus; Motorola; Nokia and more.

You can freely adjust the height of the bracket through this knob and choose the height that suits you best. The magnetic car phone mount suction cup is washable, durable and long-lasting. Super magnetic forcethe apps2car hands free car phone holder equipped with 6 super magnetic N52 magnets, even when driving on bumpy roads, arranged in accordance with the north and south magnetic poles to make the magnetic force stronger, the phone can be held firmly in place.
BrandAPPS2Car
ManufacturerKeoye
Weight0.18 kg (0.4 Pounds)

4. UGREEN

Galaxy S21 Ultra/S20 FE/S10, Huawei P40, Pixel 6Grey, Redmi Note 10, UGREEN Air Vent Car Phone Holder Mobile Mount Clip Cradle Stand 360 Rotation Compatible with iPhone 13 Pro Max/12/SE/XSMAX/8+

UGREEN - Improved rustproof silicone: solid metal arms with non-slip rubber pads grip the device inside in a stable and wobble-free manner. Infinite flexibility: this ugreen car phone holder provides 360 degrees flexible angle adjustment, it can be easily adjusted with just one hand for vertical or horizontal use of the mobile phone.

No block to your sight while driving. Mini but mightier: with the upgraded sturdy design, the clip of this Vent Phone Holder clamps deep into the slat which makes your phone more stable and doesn't fall off. You can charge the mobile phone and use it as a navigation system simultaneously. Flawless phone operation: this compact car phone holder grips your cell phone from the side, so all connections remain freely accessible.

Wide compatibility: ugreen car mobile phone holder can easily accommodate huge smartphones up to 7. 1 inches. The smooth operation of the clamp mechanism allows you to fix and take out your phone with one hand. Compatible with iphone 13 pro max 12 pro 11 xr xs se 3, pixel 6 pro 5 4a 3, xiaomi 9 10 pro redmi note 10 poco x3 m3, realme, galaxy s21 ultra S20 FE S10 A20 A50 A51 A52 M51, Huawei P50 Pro P40 P30 Lite Mate 40 Pro, oneplus 9 Pro 8T 8Pro, etc.
BrandUGREEN
ManufacturerUgreen Group Limited
Weight0.3 kg (0.66 Pounds)
Part Number10422
Model10422

5. UGREEN

UGREEN Car Phone Holder Air Vent Mobile Mount Gravity Stand Cradle Compatible with iPhone 13 Pro Max/12/11/XR/XS/8,Galaxy S21 Ultra/S20 FE/S10/S9/A71/A51/A21s,Huawei P50,Redmi Note 10,Pixel 6Silver

UGREEN - Simply put your phone into the gravity holder, the gravity will retract the holder arms and form a stable triangle structure to securely hold your phone, even on speed humps or bumpy road. Free your hand for safe driving. Never worry about power off on your trip when this car mount is installed. Easy to fit your phone and no need to stick metal plate to phone or clamp the phone by 2 hands.

The gravity phone holder not only keeps your phone close to you for easy access and hands-free navigation, but also won't block your driving vision. Just clip this car phone mount onto the air vent and slip your phone into its gravity clamp. One-hand operation: ugreen car phone holder for air vent enables you to put down or pick up your phone simply with one hand. Auto-clamp gravity linkage design: the gravity car vent phone holder features a auto-clamp gravity holder to hold your phone in place. The reserved charging port enable you to charge your phone and keep it on power even on this gravity mount.

Universal fit: the mobile phone vent cradle fits 4. 7-7"phones of a thin protective case, mi 11/mi 10t lite/mi a2/redmi note 10 pro, moto g8/g7, sony xperia l4 / l3/l1/xa/xz, google pixel 6 pro/5/4a/3a/3 xl, like galaxy s21 ultra/s21/s20 fe/s20+/s10 lite/s10e/note20 ultra/note10/s9/s8/a10/a20e/A21s/A40/A50/A51/A70/A71, blackberry, iphone 13/13pro max/12 pro max/SE 2020/SE 3 2022/11/XS/XR/X/8 Plus/7/6S, lg, oneplus 9/8/7 pro, huawei p50 pro/p40/p30/p20/p smart/p10, htc, Nokia 9/8/7.1/6. 2.
BrandUGREEN
ManufacturerUgreen Group Limited
Part Number40907
Model40907

6. Beglero-EU

Ultra Stable & Sturdy Phone Holder for Car, Etc, Car Phone Holder, Air Vent Car Phone Mount, 360° Rotation Phone Holder Vent Compatible with iPhone 13/12/11/XR/X/8/7/Galaxy S20/Huawei/LG/Sony

Beglero-EU - Finally, we has overcome all weaknesses to develop the most cost-effective and full of surprises car phone holder. This is what distinguishes us from other mounts with a back button and a single-sided button. It also has the ability to be compatible with otterbox, leather case, wallet case and more cases up to 20mm 08in thick. Broad compatibility : works with almost all smartphones from 4.

7'' screens to 6. 9'' screens, including but not limited to all iPhone Series and Galaxy Series. Flexible adjustable angle : this phone car holder not only does it support 360° rotation of the phone for landscape or portrait use, but you can also tilt it left and right to adjust the angle of the phone facing you, so enjoy the best drving experience. Humanize : in order to customers use more convenient, and avoid squeezing the volume keys and power keys on some phones, we was to invent 5-level adjustable bottom foot. 100% all-round protection : we pays great attention to your phones :this car phone holder is made of thick silicone pads at the bottom and a soft silicone sheet on the side, 100% full protection of your phone, no matter How bumpy road is, it willProtect your phone from being scratched.

The most cost-effective car phone holder in 2022 :we always listened to customers, researched and compared all types of vent cradles, we has listened to Feedback and suggestions from customers, strictly test product stability & flexibility & safety & compatibility & durability. And this air vent car phone mount holder is specially equipped with release buttons on both sides, which is convenient for left and right-hand operation. Stable and durable : this car bracket is equipped with a spiral lock system-Rotation adjustment & locking structure, Compared with other air outlet clips, the stability of the ventilation clip is increased by 20 times! There’s no need to worry about the phone shaking and.
BrandBeglero-EU
ManufacturerBeglero-EU
ModelAir Vent Car Phone Mount

7. MSCACM

Car Phone Holder,Car Holder,Universal Car Phone Mount,Windscreen Car Holder Grip Flex Long Arm Windshield Car Cradles with Extra Dashboard Base for iPhone13/12/11/X/8 Series,Galaxy S20/10 Note LG,etc

MSCACM - With a powerful suction cup, p10 plus, motorola, mate20/30, p20 lite, google, you can easily hold 4-6.9 inch phones, such as iphone13/13 mini/13 pro/13 pro max/12/12 pro/12 pro max/12 mini/11 pro max/11 pro/11/xs max/xr/xs/x/8 p;galaxy: s21/s21+/note20/s20/s10/s20+/S9+/S9/Note 8/Note 5/S8 Plus/S8/S7/S7 Edge/S6 Plus/S6;P20 pro, P20, P10, OnePlus, and etc.

Upgrading the suction cup of car phone holderwe upgraded the material of the suction cup of the car phone cradles from PVC to TPU, at the same time, thereby greatly improving the heat resistance and stability of the suction cup, we increase the hardness of TPU from 70 to 75, so that the suction cup is not easy to deform. Note: 1. Car phone holder avoid heat or direct sunlight for a long time; 2. Please use car phone mount after 24 hours of installation. The intention behind such a design is to keep the holder stable and avoid wiggling. We have included a stabilizing device in the package to fix the gooseneck to prevent shaking.

Long flexible arm allows for easy positioning, and brings the phone closer to the driver so you can keep your eyes on the road instead of looking down at your phone. Double stability: The car phone mount has a stabilizer with 3M adhesive. Washable suction cupwhen the suction cup is covered with dust and affects the adsorption performance, you can restore the adsorption performance by washing with water. High quality aluminum gooseneckcar phone holder has up to 13 inches in total length from car phone mount back to suction Cup that Easily Push Gadgets to Your Face.
BrandMSCACM
ManufacturerMSCACM
Height7.49 cm (2.95 Inches)
Length12.6 cm (4.96 Inches)
Width8.51 cm (3.35 Inches)

8. Beglero-EU

15W Qi Fast Charging, Air Vent Dashboard Car Phone Holder Compatible with iPhone 13 12 11/Pro/Pro Max/XR/XS/X/8, etc, Galaxy Note 20/S20/S10, Wireless Car Charger, Auto-Clamping Car Wireless Charger

Beglero-EU - The suction cup with sticky gel and anti-shake stabilizer attaches securely to the windshield and dashboard. Flexible and unlimited angles : the 15cm/5. 9in long and flexible gooseneck provides an easy way to position your phone, so you can see and tap the screen without blocking your view of the road.

The vent clip with a twist-lock feature provides a strong clamp without falling. Case friendly and adjustable design : the car mount works with most cases up to 4mm thick. Auto-clamp and power-off delay : the mount features motorized arms that open with one touch, then hug your phone automatically when the phone is in. For normal wireless and fast charging, cards, please remove metal/ magnetic objects, or pop holders from the back of the phone/case.3-in-1 installation : the wireless car charger comes with both a suction cup base and an air vent clip.

Qi wireless fast charging up to 15w : max 15w fast wireless charger for latest lg g7 thinq, v30+;10w for galaxy note 10+/note 10/s20/s10+/s10/note 9/s9+/s9 and more; 7. 5w for iphone 13/13 pro max/11 pro max/11 pro/11/xs Max/XS/X/XR/8 Plus/8 10W/7. 5w requires QC 3. 0/qc 2. 0 car charger; 5w standard charging for other Qi-enabled phones requires 5V/2A car charger. The adjustable bottom foot can help align different phones for efficient wireless charging.
BrandBeglero-EU
ManufacturerBeglero-EU

9. MP Tele CA

Galaxy S20/S10, with Quick Release Button, MP Tele CA Car Phone Holder Vent, Car Phone Mount 360° Rotation, Mobile Phone Holder for Car, Compatible with iPhone 12/12 Pro/12 Mini/11 Pro Max/11

MP Tele CA - Wide compatibility: with the extended arm 1. 9-3. 6 inches, the universal car phone holder is capable of any phones with a display from 4 to 6. 5 inches a thin phone case friendly, 8/8 plus, compatible with iphone xS Max, X, 7/7 plus 6s 6/6 Plus, Galaxy S9 S8 S7, Google Pixel, HTC, XR, LG.

Simple operation: 1. Press the quick release button on back to open and put the phone in. Extreme flexibility: easily adjust the viewing angle by 360° ball joint to get a clear & comfortable view and reduce cervical spine fatigue. All these steps can be done with one hand, achieving true simplicity. Made of the material high-quality manganese steel and exterior TPU, the car phone holder can keep the phone stable so that the drop rate can be less than 01%.

Compatible phone models: iphone 12/12 pro/12 mini/se 2020/11 pro max/11/11 pro/XS Max/XR/X/8/8 plus/7/7 plus/6s/6/6 Plus. 2. Press the arms on both sides to clamp mobile phone again. The car phone holder vent leaves the phone charging port unblocked for easily charger, without disrupting normal use when the phone runs low. Double air vent clip: the car phone holder vent provides a double clip 3. 8&2 mm, suitable for air outlets of different thicknesses.
BrandMP Tele CA
ManufacturerMP Tele CA
Height7 cm (2.76 Inches)
Length10.5 cm (4.13 Inches)
Width8.5 cm (3.35 Inches)
Part Number040BB
Model040BB

10. Syncwire

Syncwire Car Phone Holder, Air Vent Hands Free Clip Compatible with All Phones iPhone Samsung, Super Strong Suction Car Phone Mount, Long Arm Universal Dashboard Windscreen Handsfree Mount, etc

Syncwire - The thick 3m gel suction cup can provide excellent suction power, ensuring 100% secure installation. The vent clip can be adjusted freely and firmly fixed on the vents of different thicknesses. All places work perfectly! also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences.

The length of the bracket can be adjusted within the range of 13-18. 5 cm 5. 1-7. 3 inch and 270°. Put the phone on the cradle so that you can easily use satellite navigation or make hands-free calls, etc. All operations can be done with only one hand, we have upgraded the release button, which is more convenient and safer. Single-handed operationto ensure a more comfortable operation, which can be pressed with only one hand; The clamping arm 1S opens quickly. The ball head and knob are made of non-slip material, which is more convenient to use.

2021 super phone holdersyncwire mobile phone holder for car is equipped with a solid ventilation clip and suction cup bracket, so you can install the bracket in multiple positions, such as dashboard, vent or windshield Glass etc. You can make adjustments to get the best perspective, and then focus on safe driving. Note: the sticky pad just can be used once, 1 strong air vent clip, please think twice to stick it. 360°adjustable viewing anglethe car phone holder is a compact and ideal holder.
BrandSyncwire
ManufacturerSyncwire
Part NumberSW-CH671
ModelSW-CH671