As an Amazon Associate I earn from qualifying purchases.
KCVB2748, SMALLRIG Cage Kit for Blackmagic Design BMPCC 4K & 6K Camera, BMPCC 4K & 6K Cage Kit with Camera Cage Top Handle SSD Mount HolderSMALLRIG
- Mutiple moutings: one shoe mount, and multiple 1/4"-20, led flash, 3/8"-16, several NATO rails, and arri-style accessory threads are built into the cage's top and sides for accessories such as monitor, microphone, etc. It securely clamps both the T5 SSD and the connected USB Type-C cable via locking levers.
Ssd mount: this ssd mount offers flexible positioning on your cage using the included 1/4"-20 screws. High customization: specifically designed for bmpcc 4k & 6k camera, the cage kit comes with a cage, a top thread handle and a SSD T5 Mount.
Rubber pads on the bottom protect your camera body from scratching. Top handle: this smallrig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease.
The mount's offset design helps avoid interference with an attached top handle, side handle, or other accessories. Perfect protection: secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.
|Height||18.5 cm (7.28 Inches)|
|Length||22.9 cm (9.02 Inches)|
|Width||17.3 cm (6.81 Inches)|
2203B, 6K, New Version SMALLRIG Cage Compatible with BMPCC 4K, Camera Cage for Blackmagic Pocket Cinema Camera 4K with Anti-twist Mechanism and Mounting PointsSMALLRIG
- Firm locking with two 1/4’’ screws on the top and bottom of the cage, it can secured the camera. It also unobstructed battery & SD card access. Furthermore, like handheld shooting, tripod shooting, the BMPCC 4K can be compatible with DJI Ronin S or Zhiyun Crane 2 gimbal stabilizer with the mounting points on bottom of the cage.
For better setup, 6k cage 2203 is designed to provide an all-around protection and mounting points for BMPCC 4K, which are exclusively design. High customization smallrig bmpcc 4k, “smallrig lens adatper support for metabones 2247” and “smallrig hdmi cable clamp 2246”, please search “smallrig mount for samsung t5 ssd 2245”, 6k camera.
The form-fitting design maintains high level of precision and ergonomics. Note* when the cage is used with bmpcc 6k, smallriG Lens Mount Adapter Support 2247 is NOT applicable.
Top recommendation smallrig lens adapter support 2247 can be fixed on smallrig cage 2203 and keep your lens stable. Multiple scenes it is suitable for multiple usage scenarios, run & gun shooting. Nato rails the built-in nato rails are on the top and left side, smallrig handle 2187, which allows you to attach SMALLRIG handle 2118, SMALLRIG handle 1955 for handhold shooting. Smallrig magic arm 2071 can also be attached to connect a monitor. Also features rubber cushions on the bottom of the cage that increase the friction between the cage and the camera.
|Height||7.5 cm (2.95 Inches)|
|Length||19.2 cm (7.56 Inches)|
|Width||11.5 cm (4.53 Inches)|
CVB2254B, New VersionSMALLRIG BMPCC 4K/6K Half Cage Compatible with Blackmagic Pocket Cinema Camera 4K/6K, Half Cage with Anti-twist Mechanism and Built-in NATO RailsSMALLRIG
- Anti-twist: secured the camera with two 1/4’’ screws on the top and bottom of the cage. Nato rail: the built-in nato rails are on the top and left side, which allows you to attach SMALLRIG Side Handle 2187, SMALLRIG NATO Handle 1955 for handhold shooting.
It leaves full access to the camera grip and buttons when the cage attached. Features rubber cushions on the bottom that increase the friction between the cage and the camera. Now you can mount a smallrig ssd mount 2245 on top of this cage without interference in the cold shoe and wrist strap.
Lock cable plugs with SMALLRIG Cable Clamp 2246. Note* when the cage is used with bmpcc 6k, smallriG Lens Mount Adapter Support 2247 is NOT applicable.
For bmpcc 4k/6k: smallrig cage cvb2254b is a half cage which provides extension possibility for BMPCC 4K/6K Camera. Two additional detachable locating pins prevent camera deflection. New version: it is the updated version. You could fix samsung t5 ssd on top left corner of SMALLRIG SSD Mount 2245. Related accessories: smallrig lens adapter support 2247 can be fixed on this cage ti keep your lens stable.
|Height||11.5 cm (4.53 Inches)|
|Length||13.6 cm (5.35 Inches)|
|Width||7.5 cm (2.95 Inches)|
SMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K, KCVB2419SMALLRIG
- Original designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder. The cage rig for bmpcc 4k & 6k is locked by 1/4”- 20 screws on both the top and bottom, ARRI Locating Holes, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
The handle attaches directly to the cage’s NATO rail on the top and is adjustable forward and backward. The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp.
Top recommendationwhen working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842. Mounting pointssmallrig 2419 features multiple mounting points including nato rail, 1/4"-20 & 3/8"-16 holes, and cold shoe mount.
Mount for t5 ssdthe ssd holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. This is a basic and light handheld kit for BMPCC 4K & 6K users. For handheld shootingthis top handle from smallrig features a shoe mount for microphone and led lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. The basic handheld kit for blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K.
|Height||17.55 cm (6.91 Inches)|
|Length||21.2 cm (8.35 Inches)|
|Width||11.8 cm (4.65 Inches)|
SMALLRIG Cage with Top Handle for Blackmagic Design Pocket Cinema Camera 4K & 6K, KCVB2747SMALLRIG
- It can hold the weight of a large cage rig with various attachments with ease. Rubber pads on the bottom protect your camera body from scratching. Mounting points: this cage comes with multiple mounting points, nato rail, allow you to attach more accessories, such as 1/4” & 3/8” threaded holes, cold shoe and 3/8” locating holes for ARRI standard, like microphone or SmallRig Magic Arm 2070, etc.
High customization: specifically designed for bmpcc 4k & 6k camera, the cage kit comes with a cage and a top handle.
Featured recommendations: to build a better setup, you can search “smallrig mount for samsung t5 ssd 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K.
Top handle: this smallrig top handle equipped with built-in shoe mount for microphone and LED lights, is designed for handheld shooting. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. Perfect protection: secure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting.
|Height||13.1 cm (5.16 Inches)|
|Length||19.2 cm (7.56 Inches)|
|Width||18.5 cm (7.28 Inches)|
SMALLRIG Camera Cage Compatible for BMPCC 4K & 6K with Battery Grip Attached, 2765SMALLRIG
- The cage secures to the camera via one 1/4" screw on the top and two on the bottom, which works for anti-twisting. Worry-free 2-year warranty, 1x 1/4'' screw, 30-day No-hassle Return Service, and friendly 24-hour customer service.
It maintains full access to the camera's controls and ports when mounted on your camera, and it also provides access to the batteries in the vertical grip.
Smallrig cage 2765 is designed to hold bmpcc 4K & 6K with battery grip attached, it provides protection and accessory mounts. What you get: 1 x cage, 1x allen wrench. This cage incorporates multiple 1/4" and 3/8" threads, locating holes for ARRI, two built-in NATO rails, and three built-in cold shoes for accessory mounting.
|Height||16.3 cm (6.42 Inches)|
|Length||19.15 cm (7.54 Inches)|
|Width||7.5 cm (2.95 Inches)|
6K, 2245B, New Version SMALLRIG Mounting Bracket Compatible with Samsung T5 SSD, Mount Adapter for Samsung T5 SSD Works with SMALLRIG Cage for BMPCC 4KSMALLRIG
- High qualitysmallrig 2245b is made of aluminum alloy, sturdy and durable. New versionthis is the new version 2245b but can still work with the old version smallrig cage 2203, cvb2254 and cvb2255.
Also, it weighs only 58g. Please bolt it to the suggested place as shown in the picture using two 1/4”-20 screws, which won’t interfere with other accessories attached. It secures both the t5 sSD and the connected USB-C cable by locking levers.
Compatibilitycompatible with smallrig bmpcc 4k & 6k cage 2203/2255/2254 Both the new version and the old version. Installationit attaches to the camera rigs using two included 1/4”-20 screws, which can flexibly position on cage or handles. High customizationthe ssd mount can help you stabilize the samsung t5 ssd when you use the BMPCC 4K & 6K camera equipped with SMALLRIG BMPCC 4K & 6K cage.
|Height||2.66 cm (1.05 Inches)|
|Length||7.25 cm (2.85 Inches)|
|Width||4.9 cm (1.93 Inches)|
2246B, New Version SMALLRIG HDMI Cable Clamp for BMPCC 4K, 6K USB-C Cable Clamp for BMPCC 4K, 6KSMALLRIG
- Locking tightlythe clamp attaches to the side of the cage with two 1/4”-20 knob screws, securing both the HDMI and USB-C cable by tightening two sliding blocks. It’s significant for DSLR/camcorder shooters to capture audio/video.
High customizationthe cable clamp is exclusively designed for sMALLRIG BMPCC 4k & 6k cage that works with Blackmagic design pocket cinema camera 4k & 6k. New versionthis is the new version 2246b, and can only work with new version cage 2203b, can not work with OLD VERSION cage 2203, cvb2254b and cvb2255b, CVB2254 and CVB2255.
Please notethe cable clamp may block plug-in and plug-out of the power cord, we suggest take the clamp completely off when you want to remove the power cord. High protectionthe cable protector is used to prevent hdmi&usb-c cable from being collision or broken, make data transmission more stable.
|Height||1 cm (0.39 Inches)|
|Length||3.9 cm (1.54 Inches)|
|Width||3.4 cm (1.34 Inches)|
AAA2700, SMALLRIG HDMI & Type-C Right-Angle Adapter ONLY Compatible with BMPCC 4KSMALLRIG
- Smallrig right-angle adapter aaa2700 designed for blackmagic design Pocket Cinema Camera 4K. It can be attached to many models smallrig camera cage for bmpcc 4k, 2203b, such as 2203, cVB2254，CVB2254B，CVB2255，CVB2255B and 2766.
It works to change the direction of the HDMI and Type-C ports to the screen. For the safety, please do not use it in damp conditions.
Note: it is not work for blackmagic design pocket Cinema Camera 6K, please comfirm the model of your camera before purchasing. It features a thumbscrew to fix the adapter to the side of the camera cage tightly, and ensure a more stable connection. The 2 in 1 hdmi and type-c adapter takes up very little space and won’t affect the use of other interfaces.
|Height||3.9 cm (1.54 Inches)|
|Length||5.14 cm (2.02 Inches)|
|Width||3.05 cm (1.2 Inches)|
BSH2343, SMALLRIG SSD Mount Bracket SSD Holder for Samsung， SanDisk T5 SSD, Compatible with SMALLRIG BMPCC 4K & 6K Z Cam E2 CageSMALLRIG
- Cold shoe adapterit comes with a detachable cold shoe adapter which can be fixed on the bottom or side of the holder, so you can mount the SSD to a cold shoe; or after removing it you can use 1/4”-20 screws to mount the holder, which is super flexible.
Rubber cushionthe holder features soft protective rubber cushions inside, keeping the SSD securely in the clamp and preventing it from scratches. You could fix the cable clamp with one hand, which makes shooting more convenient.
High customizationsmallrig ssd clamp bsh2343 is designed to mount a ssd on cameras such as BMPCC 4K & 6K and Z Cam E2.
Cable clamp includedthe ssd mount comes with a cable clamp to fix the USB-C cable, fastened by a knob screw. Adjustablethis spring-loaded clamp is stretchable on both sides, fitting different SSD like Samsung T5 SSD, angelbird ssd2go PKT, Glyph Atom SSD, SanDisk 1T SSD, G-Technology G-DRIVE Mobile SSD and more. This ssd holder is compact and versatile for photographers and video shooters.
|Height||4.65 cm (1.83 Inches)|
|Length||6.85 cm (2.7 Inches)|
|Width||5.4 cm (2.13 Inches)|